- Home
- ยป
- Products & Services
- »
- AMF PANEL
AMF PANEL
Auto Mains Failure AMF Panels
Product Brochure
Usage/Application | College |
Power | 150A |
Brand | L&T |
Model Name/Number | INDUS AMF PANEL |
IP Rating | YES |
Phase Type | 3 - Phase |
Frequency | 50 HZ |
Capacity | 150 A |
Circuit Bracket Used | 150 A |
We are manufacture of amf panel, and this is used for commercial & Industrial purpose, the cost of amf controller is Rs.12,000
the cost of 62.5 kvaamf panel using 100A ATS is Rs.45,000/- only
the cost of 125 kvaamf panel using 250A ATS is Rs.95,000/- only
the price of 100A ats is Rs.15,500/-
the price of 250A ats is Rs.22,500/-
the price of 400A ats is Rs.30,500/-
the price of 630A ats is Rs.50,500/-
Auto Mains Failure Control Panel
Product Brochure
Usage/Application | FLAT |
Power | 100A |
Brand | HAVELLS |
Model Name/Number | INDUS AMF PANEL |
IP Rating | YES |
Phase Type | 1 - Phase |
Frequency | 50 HZ |
Capacity | 100A |
Circuit Bracket Used | 100A |
We are manufacture of amf panel, and this is used for commercial & Industrial purpose, the cost of amf controller is Rs.12,000
the cost of 62.5 kvaamf panel using 100A ATS is Rs.45,000/- only
the cost of 125 kvaamf panel using 250A ATS is Rs.95,000/- only
the price of 100A ats is Rs.15,500/-
the price of 250A ats is Rs.22,500/-
the price of 400A ats is Rs.30,500/-
the price of 630A ats is Rs.50,500/-
100A AMF Panel
Product Brochure
Usage/Application | Industrial |
Brand | L&T |
IP Rating | YES |
Phase Type | 3 - Phase |
Frequency | 50 HZ |
Capacity | 40 KVA |
We are manufactures of amf panel from 60 KVA TO 500 KVA
INDUS AMF Relay which one monitoring and controlling the DG sets. It monitoring the mains power supply and starts the set when any one of the mains supply fails. And changeover by switching the contactor mounted in the panel. After the mains are restored the load will be removed from Genset and transferred to mains. The three independent CMOS monolithic power measurement device with a computation engine system measures the voltage, current, component of the network through all the three phase current and voltage. The wide 20 X 4 LCD showing all important parameters which one helps us to monitoring the load and engine details.
Features
· DG monitoring systems Volt, Ampere, RPM, Battery Voltage, Running Hours, and Frequency
· User friendly programming mode.
· 4 X 20 Alpha Numeric LCD display.
· Auto scrolling display parameters – Individual phase Volt, Amps, Running Hours, DC battery voltage, Frequency, and RPM.
· Select ETR (Energies to Run) or ETS (Energies to Stop) method.
· Program in Mains Restore Time.
· Program in Start Delay Time.
· Program in Crank on Time.
· Program in Crank Interval Time.
· Program in Number of Cranking.
· Program in DG Warm up Time.
· Program in DG Cooling Time.
· Program in High Voltage and Current setting.
· Program in Low Current Setting.
· Program in CT Primary Value.
· Low Oil Pressure Control.
· High Temperature Control.
· Single Phase Preventer Inbuilt for Mains supply.
· 12 DC or 24 DC volts Models.
250A ATS 5 Nos AMF Panel
Product Brochure
Usage/Application | COLLEGE |
Brand | HPL |
Power | 250A |
Model Name/Number | 250A |
IP Rating | YES |
Phase Type | 3 - Phase |
Frequency | 50 HZ |
Capacity | 200 KVA |
Circuit Bracket Used | 250A |
Dimensions | 1500MM X 400MM X 1500MM |
We are manufactures of amf panel from 60 KVA TO 500 KVA
INDUS AMF Relay which one monitoring and controlling the DG sets. It monitoring the mains power supply and starts the set when any one of the mains supply fails. And changeover by switching the contactor mounted in the panel. After the mains are restored the load will be removed from Genset and transferred to mains. The three independent CMOS monolithic power measurement device with a computation engine system measures the voltage, current, component of the network through all the three phase current and voltage. The wide 20 X 4 LCD showing all important parameters which one helps us to monitoring the load and engine details.
Features
· DG monitoring systems Volt, Ampere, RPM, Battery Voltage, Running Hours, and Frequency
· User friendly programming mode.
· 4 X 20 Alpha Numeric LCD display.
· Auto scrolling display parameters – Individual phase Volt, Amps, Running Hours, DC battery voltage, Frequency, and RPM.
· Select ETR (Energies to Run) or ETS (Energies to Stop) method.
· Program in Mains Restore Time.
· Program in Start Delay Time.
· Program in Crank on Time.
· Program in Crank Interval Time.
· Program in Number of Cranking.
· Program in DG Warm up Time.
· Program in DG Cooling Time.
· Program in High Voltage and Current setting.
· Program in Low Current Setting.
· Program in CT Primary Value.
· Low Oil Pressure Control.
· High Temperature Control.
· Single Phase Preventer Inbuilt for Mains supply.
· 12 DC or 24 DC volts Models.
400 A AMF Panel
Product Brochure
Usage/Application | HOSPITAL |
Brand | ABB |
IP Rating | YES |
Phase Type | 3 - Phase |
Frequency | 50 HZ |
Capacity | 400 KVA |
Circuit Bracket Used | 400 A |
Dimensions | 1000MM X 400MM X 1000MM |
Meter Type | Digital |
Fault Indication | YES |
We are manufactures of amf panel from 60 KVA TO 500 KVA
INDUS AMF Relay which one monitoring and controlling the DG sets. It monitoring the mains power supply and starts the set when any one of the mains supply fails. And changeover by switching the contactor mounted in the panel. After the mains are restored the load will be removed from Genset and transferred to mains. The three independent CMOS monolithic power measurement device with a computation engine system measures the voltage, current, component of the network through all the three phase current and voltage. The wide 20 X 4 LCD showing all important parameters which one helps us to monitoring the load and engine details.
Features
· DG monitoring systems Volt, Ampere, RPM, Battery Voltage, Running Hours, and Frequency
· User friendly programming mode.
· 4 X 20 Alpha Numeric LCD display.
· Auto scrolling display parameters – Individual phase Volt, Amps, Running Hours, DC battery voltage, Frequency, and RPM.
· Select ETR (Energies to Run) or ETS (Energies to Stop) method.
· Program in Mains Restore Time.
· Program in Start Delay Time.
· Program in Crank on Time.
· Program in Crank Interval Time.
· Program in Number of Cranking.
· Program in DG Warm up Time.
· Program in DG Cooling Time.
· Program in High Voltage and Current setting.
· Program in Low Current Setting.
· Program in CT Primary Value.
· Low Oil Pressure Control.
· High Temperature Control.
· Single Phase Preventer Inbuilt for Mains supply.
· 12 DC or 24 DC volts Models.
AMF Panel
Product Brochure
Usage/Application | Appartments |
Power | 225 A |
Brand | SCHNIDER |
Model Name/Number | INDUS AMF PANEL |
IP Rating | YES |
Phase Type | 3 - Phase |
Frequency | 50 HZ |
Capacity | 225 A |
Circuit Bracket Used | 225 A |
We are manufacture of amf panel, and this is used for commercial & Industrial purpose, the cost of amf controller is Rs.12,000
the cost of 62.5 kvaamf panel using 100A ATS is Rs.45,000/- only
the cost of 125 kvaamf panel using 250A ATS is Rs.95,000/- only
the price of 100A ats is Rs.15,500/-
the price of 250A ats is Rs.22,500/-
the price of 400A ats is Rs.30,500/-
the price of 630A ats is Rs.50,500/-